Aluminum alloy welding filler wire

Introduction of Aluminum alloy welding filler wire
Aluminum alloy welding filler wire is selected according to conditions such as the type of base material, the mechanical properties of the joint and the requirements for corrosion resistance. Under normal circumstances, when welding aluminum and aluminum alloys, thin plates with a chemical composition similar to the base metal are often cut into strips as welding wires. For heat-treated-strengthened aluminum alloys with a greater tendency to weld hot cracks, welding wires with good crack resistance should be used.
 
At present, our company mainly produces four series of aluminum and Aluminum alloy welding filler wire: pure aluminum welding wire, aluminum-magnesium welding wire, aluminum-silicon welding wire, and aluminum-manganese welding wire. The products are suitable for the needs of different customers and sell well at home and abroad.
 
Our company purchases raw materials from large domestic aluminum manufacturers, and the professional welding team independently innovates the domestic welding wire production process to process and produce. It conforms to the international GB standard and the US AWS A5.10 standard and has passed the international European Union CE certification. The surface of the Aluminum alloy welding filler wire is smooth, bright and clean, without burrs, depressions, creases or other oxidizing impurities. Aluminum alloy welding filler wire is fed evenly and continuously on the automatic welding equipment. The welding defects produced during welding are obviously reduced, and the weld seam is beautifully formed.