ER4047 Aluminum TIG Welding Rod

Current Position ： Home/Welding Wire/ ER4047 Aluminum TIG Welding Rod

ER4047 Aluminum TIG Welding Rod

Author：  Time：2023-05-18
ER4047 Aluminum TIG Welding Rod

Detail


ER4047 aluminum TIG welding  rod
 
ER4047 is a eutectic Al Si alloy with 12% silicon, low melting point, good fluidity, and has good corrosion
resistance. But it is anodized after the color is black.
 
Application:
suitable for Al Si, Al Si mg, Al Si Cu mg wrought aluminum and aluminum (>7%Si) argon arc
welding. More widely used for pure aluminum, aluminum manganese, aluminum silicon magnesium alloy.

Density kg/dm3 Melting temperature ℃ Electric conductivity % IACS
2.65 573---585 41

Weld Mechanical Properties (reference value)
Tension Strength(MPa) Yield  Strength(MPa) M
160--190 70--85 10--15

ER4047   Aluminium & Aluminium Alloy welding Rods
Classification GB/T 10858-2008   AWS A5.10···       ER 4047
 
Typical composition in %		 Si················          11.00—13.00
Fe················               ＜0.60
Cu················               ＜0.30
Mn················               ＜0.15
Mg················               ＜0.10
Zn················                ＜0.20
Be················                ＜0.0003
Ti················                  ＜0.15
Others·············                   ＜0.05
Others Total·········                      ＜0.15
 
Physical properties
(Approx.Values)		  0.2% yield strength Rpo2 (Mpa)·····  60
 Tensile Strength Rm (Mpa)·····          130
 Elongation A5 (L0=5d0) (%)······       5
 Test Temperature (℃）······          20
 
Performance & Usage		  
This type containing 12% silicon,which can be adapted in welding all kinds of 
forging and casting or extruded shape aluminium alloys.And it has advantages
 of low melting point and good fluidity which avoids the distortion after welding.
Usage：jointing or overlay light alloy processing.
Shielding gas Argon, Helium, or Argon/Helium—mixtures.
Dimensions Φ MIG—Rods (mm)：
0.8 ; 0.9 ; 1.0 ; 1.2 ; 1.6 ; 2.0 ; 2.4
TIG —rods（mm)：
1.6 ; 2.0 ; 2.4 ; 3.2 ; 4.0 ; 5.0 ; 6.0
Rod Packagings Mig Rods：
S100/0.5kg 1Lb , S200/2kg , S270-S300/6kg-7kg
Tig Rod  ：
5/10kg     ·······     length ：1000mm

Note :
 
1. Al Si Rod although there are strong crack resistance, but plastic is poor, so after welding need plastic
deformation joints, should avoid using aluminum silicon Rod.
 
2. The oxide and oil stain on the edge of the workpiece must be removed before welding.
 
3. Welding can be used when the plate holding molten metal, to ensure weld forming.


Welding Wire
CONTACT US
CONTACT US
Looking Forward to Your Response!

Mobile：86 17344894490

Email：inquiry@signialuminium.com

Address：A126 Building 4, No.89 Science Avenue,National HI-Tech Industry Development Zone,Zhengzhou,Henan

HOME Alloy Brazing Brazing Sheet Welding Wire Fin Stock Factory QC. About US Contact Us Sitemap.xml

TEL：17344894490 EMAIL：inquiry@signialuminium.com
Address：A126 Building 4, No.89 Science Avenue,National HI-Tech Industry Development Zone,Zhengzhou,Henan
HOTLINE:
17344894490